The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Racing and high performance (trucks haulin more than hay) (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=60)
-   -   434 sbc oil pan (https://67-72chevytrucks.com/vboard/showthread.php?t=825942)

bigsnookmaster 09-18-2021 07:44 AM

434 sbc oil pan
 
Been awhile since I have posted. I am building a new 434 SBC for my 68. I am using a Dart Little M raised cam location block. I am looking for recommendations for an oil pan to fit the stock chassis and crossmember. Street driven most all the time. Looking for a good pan for oil control and to keep windage down. Opinions of running a true crank scraper also? Thanks for any info!

regan wilson 09-18-2021 08:06 PM

Re: 434 sbc oil pan
 
I would put more money in a good pump than a pan. I'm a believer in Gerotor style pumps. no need for a crank scraper on a street motor.

bigsnookmaster 09-20-2021 07:53 AM

Re: 434 sbc oil pan
 
Thanks for the response, I will do my homework and look into that.

nxtruck 09-23-2021 03:37 PM

Re: 434 sbc oil pan
 
As far as a pan goes, I ran a Kevko #1070 street/strip pan on my stock block 434 and I have that same pan (only in a RH dipstick configuration) on my SHP 434 now. Fits great and shows no oil pressure drop going down the track. I did have to do some minor clearancing on the crank scraper, however, but nothing major.

regan wilson 09-23-2021 08:08 PM

Re: 434 sbc oil pan
 
There ya go a Small Block guy to talk to. Nx knows what to do.

regan wilson 09-23-2021 08:10 PM

Re: 434 sbc oil pan
 
I still don't like stock type Melling pumps though.

bigsnookmaster 09-25-2021 06:02 PM

Re: 434 sbc oil pan
 
Quote:

Originally Posted by nxtruck (Post 8975162)
As far as a pan goes, I ran a Kevko #1070 street/strip pan on my stock block 434 and I have that same pan (only in a RH dipstick configuration) on my SHP 434 now. Fits great and shows no oil pressure drop going down the track. I did have to do some minor clearancing on the crank scraper, however, but nothing major.

P.M. Sent


All times are GMT -4. The time now is 01:46 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright 1997-2020 67-72chevytrucks.com