The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Restoring Rusty (https://67-72chevytrucks.com/vboard/showthread.php?t=645440)

68post 03-07-2016 04:14 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by Gregski (Post 7513140)
Hi Tim

The oil pump and pickup screen is brand new, I replaced it a few months ago when I did the rear main seal and the oil pan gasket.

That's swell !! Your engine loves you :lol:

Titomars 03-07-2016 08:32 PM

Re: Restoring Rusty - Budget Top End Build
 
Quote:

Originally Posted by Gregski (Post 7512926)
but don't you got one of them BBC, Big Beautiful Chevrolet? lol

yup, a huge heavy gas guzzling 454.................. and loving every second I drive it. ;)

Gregski 03-07-2016 10:03 PM

Re: Restoring Rusty - Engine Stroll
 
2 Attachment(s)
we finally got a break in the weather and the sun came out, so I decided to take the engine for a walk

I don't get how in our fourth year of a drought here in Norther California it has been raining and I mean poring for the last seven days, (things that make you go hmmmm)

Gregski 03-07-2016 10:07 PM

Re: Restoring Rusty
 
3 Attachment(s)
doctor, the patient is prepped and ready for surgery

Gregski 03-07-2016 10:09 PM

Re: Restoring Rusty
 
4 Attachment(s)
then it was time to [ahem] MAKE THIS ENGINE GREAT AGAIN !!!

enaberif 03-07-2016 10:25 PM

Re: Restoring Rusty
 
Do yourself a favor and do NOT break that lower dipstick tube and do not misplace it lol. Be lucky you still have it.

Gregski 03-07-2016 10:26 PM

Re: Restoring Rusty
 
2 Attachment(s)
somehow I am always happier behind a wheel, even if it is a 4 inch on an angle grinder, ha ha

I don't know about you, but I can find plenty of things to cut my hands on under the hood, so I decided the engine block wasn't gonna be one of them

time to smooth out that casting crust

Valarius_Starchaser 03-07-2016 10:40 PM

Re: Restoring Rusty
 
I would replace those steel cast plugs with some brass ones while you are at it its cheap and should never leak if installed correctly that's not a fun job with the engine in the truck/car

Gregski 03-07-2016 10:47 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by Valarius_Starchaser (Post 7513852)
I would replace those steel cast plugs with some brass ones while you are at it its cheap and should never leak if installed correctly that's not a fun job with the engine in the truck/car

dang it you are right about that, I already replaced two of them with the engine in the truck, luckily they were not the ones hiding behind the motor mounts, but I wasn't smart enuff to go brass, I got the cheap shinny ones from China that the AutoZoner handed to me, lol

Gregski 03-07-2016 10:49 PM

Re: Restoring Rusty
 
3 Attachment(s)
the sharp edges around the oil filter housing got some angle grinder love too, there much better

Gregski 03-07-2016 10:51 PM

Re: Restoring Rusty
 
2 Attachment(s)
and on to the other side

Gregski 03-07-2016 10:54 PM

Re: Restoring Rusty
 
2 Attachment(s)
first we knock off the ugly

Gregski 03-07-2016 10:58 PM

Re: Restoring Rusty
 
5 Attachment(s)
and by zi Pompa de Gasolina

Gregski 03-07-2016 11:00 PM

Re: Restoring Rusty
 
2 Attachment(s)
and second side done

labor = about 1 hour per side

y5mgisi 03-07-2016 11:10 PM

Re: Restoring Rusty
 
Always wanted to do the type of smoothing you are doing!

Jeramy 03-07-2016 11:19 PM

Re: Restoring Rusty
 
something i plan to do when i start assembling mine...unless i forget

Gregski 03-08-2016 08:57 PM

Re: Restoring Rusty
 
1 Attachment(s)
had to go into town fer supplies, yup this is how the magic happens

Gregski 03-08-2016 08:58 PM

Re: Restoring Rusty
 
5 Attachment(s)
it was a nice day so I decided to have a little pool party and all the dirty bits were invited

Gregski 03-08-2016 09:04 PM

Re: Restoring Rusty
 
5 Attachment(s)
word quickly got out and friends invited their friends, dirty little rascals

Gregski 03-08-2016 09:08 PM

Re: Restoring Rusty
 
5 Attachment(s)
and a few more

the harmonic balancer was a dirt magnet for sure, I'm surprised it stayed balanced with that 9 pounds of dirt stuck to it

Gregski 03-08-2016 09:10 PM

Re: Restoring Rusty
 
2 Attachment(s)
while those bits were soaking I got started on the engine

got the front side cleaned

enaberif 03-08-2016 09:13 PM

Re: Restoring Rusty
 
Check your harmonic balancer for cracks in the rubber as it may need replacing and now is a perfect time to invest in that.

Oh and your missing the lower bolt on the right side of the block at the front to secure the fuel push rod. This area WILL seep and leak oil if you do not put the bolt back in.

Gregski 03-08-2016 10:01 PM

Re: Restoring Rusty
 
Quote:

Originally Posted by enaberif (Post 7515031)
Check your harmonic balancer for cracks in the rubber as it may need replacing and now is a perfect time to invest in that.

Oh and your missing the lower bolt on the right side of the block at the front to secure the fuel push rod. This area WILL seep and leak oil if you do not put the bolt back in.

thanks I will and up until recently I didn't even realize there was rubber in the balancer

the bolt was removed during disassembly in order to slide that rod out allowing the cam to be removed

Gregski 03-08-2016 10:36 PM

Re: Restoring Rusty
 
1 Attachment(s)
Every time I try to get out - they pull me back in!

as I was spinning the engine block on that engine stand, I realized that it was sliding out of the rotating thingmajig, so I decided to use a C clamp from time to time to pull it back in, you know to prevent getting dead

so if you gots a similar stand, be careful you hear, engine blocks are expensive!

Gregski 03-08-2016 10:40 PM

Re: Restoring Rusty
 
5 Attachment(s)
time to do the passenger side set of cylinder banks 2-4-6-8 who do we appreciate?

I covered the other end with a rag, and kept the cylinders slightly pointed down, so when I shot brake cleaner in there to rinse them out, the debris would flow down hill and out the cylinder, seemed to work


All times are GMT -4. The time now is 03:34 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com