Re: Restoring Rusty
Quote:
question for you alls do we need to put some sort of gasket, oring, washer inside the hard line fittings to mate it to the carb, I put mine metal on metal and I am wondering if it will start leaking, so far so good, but metal don't like to mate with metal really well if you know what I mean? |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
Glad to get the updates and see the progress. Looks like you are settled in to your place so congratulations on that. |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
As for my woodworking, I've worked with wood ever since I was a kid, but I've only in recent years (I'm only 25) begun to really have this urge to make furniture and what not. I still have plenty to learn, but I'm happy with what I've made so far! This was my most recent, and biggest project. An entertainment center that's meant to be a built-in for my parent's house: https://c1.staticflickr.com/3/2827/3...05145c6d_h.jpg Built using cedar. Unfortunately, I had to have the lumber company "pick" the wood for me, since I didn't have a truck to go grab it all! Overall they did a great job, but I did end up with a few extremely warped boards. Looked into various methods of reshaping the boards, but I didn't have the time nor the proper means to do it! Sorry for the threadjack! |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
That corner was actually part of the design, to give the living room an actual focal point. Beforehand it was a large room with no real indication where a TV should be placed minus the built in speakers up top. Currently a 55" TV sits in it, but it will accommodate up to a 65"; they don't watch TV much, so a super large TV is not needed. Honestly, drawing everything up in AutoCad is was really made this easier. |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
2 Attachment(s)
Quote:
|
Re: Restoring Rusty
Quote:
Of course, since I bought my 80487, Holley has introduced an 80458 with center hung bowls. (Place "aargh" emogi here.) |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
Quote:
I need to get a pair of the clear sight glasses (for the carb.) |
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
3 Attachment(s)
so not sure I shared this with you, but last October I tried yet another exhaust though it was short lived (ran it for a week or so) because I had that dreadful crank bearing problem
anywho I took it off thinking the noise was another exhaust header leak, turns out it wasn't, but I was running my exhaust manifolds with stockish turbo mufflers ever since, well until today today we will put the Thrush Rattlers back on, or as I like to call it Exhaust 8.0 Hey what did you expect was going to happen when you leave me un supervised, LOL |
Re: Restoring Rusty
1 Attachment(s)
these are single chamber and they are not a pass through design, in other words you can't see through them, not the best for horse power and flow, but hey according to their website they are "Making Hot Rods Hotter"
|
Re: Restoring Rusty
2 Attachment(s)
and so I got to build them, here they are being compared to what I had prior, a very loud straight pipe with only 9" resonators, did I say it was loud
these will have a more turn out style tip, dumping the dirty exhaust in front of the rear tires and right into the Prius stopped at the light next to us, two if we happen to be in the middle lane, win / win |
Re: Restoring Rusty
3 Attachment(s)
tired of welding the resonators backwards in my last exhaust I decided to label the flow of the new Rattlers with some blue tape, so I weld them up right, as I believe unlike the Magmaflows these be directional
nothing to it but to do it |
Re: Restoring Rusty
3 Attachment(s)
so got the Thrush mufflers welded to the front pipes and then welded on the tail pipes, again I like to run my exhausts just to the rear axle so I don't have to do the surpentine looptie loop around it, that may be part of my drone proplems but hey that's how all the cool kids run their exhausts, hee hee
|
Re: Restoring Rusty
Quote:
|
Re: Restoring Rusty
4 Attachment(s)
a little mini update, so went back to the Remflex gaskets specifically designed for the L31 Vortec heads to ensure there are no exhaust leaks, also treated myself to some ARP header bolts, mostly for the much smaller bolt heads, should make turning them a bit easier in the very confined spaces that the headers provide
here's a little Top Tip on building your own DIY exhaust: if you design it with the parking brake on, ie the cable tension tight, when you release the parking brake for driving the truck, it might could hit the exhaust pipes, and ding like crazy, just sayin' |
Re: Restoring Rusty
1 Attachment(s)
so the truck is pretty dialed in, the new exhaust is not quite what I was looking for (a nice deep rumble) but it's the best sounding so far, (louder than the Magnaflows, yet no drone like the Flowmasters) I may keep it for a couple [ahem] days, hee hee
here's a near perfect idle AFR (Air Fuel Ratio), I hope to get it Dyno Tuned by the end of this month, here's hoping... life has been beating up on us pretty good lately, wife had foot surgery and is to recover with a big cast for 6 weeks, so we are a (wo)man down. |
Re: Restoring Rusty
I always use an "H-pipe" when building exhaust. Flows better, less drone, nice rumble - but quieter. Summit has them in their brand and they are aluminized too, pretty inexpensive !
|
Re: Restoring Rusty
Quote:
|
All times are GMT -4. The time now is 01:48 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com