73-87 Rear Mounted Aluminum Tank
1 Attachment(s)
After some requests and building a few of them over the last year here is an aluminum tank for the 73-87
This is from information gathered from a few different tanks that we were contracted to build so anything can be modified to suit your needs just call or email me. |
Re: 73-87 Rear Mounted Aluminum Tank
Is there no interest in this tank?
|
Re: 73-87 Rear Mounted Aluminum Tank
is this tank visable i want one that you wont see sagging below the rear bumper, that just gets to me
|
Re: 73-87 Rear Mounted Aluminum Tank
Quote:
Good luck with sales :) |
Re: 73-87 Rear Mounted Aluminum Tank
Quote:
|
Re: 73-87 Rear Mounted Aluminum Tank
Quote:
What is your pricing? Just using the one pictured as an example? |
Re: 73-87 Rear Mounted Aluminum Tank
Can you make one where the stock saddle bag type gas tank goes? Made as large as possible and using the stock style pickup and mounting brackets? It would also need to have good baffling like the factory tank i have.
i have an 87 with fuel injection so i want to keep the ability to replace the pump and sending unit with stock parts in the future. I plan on having only one tank so i can get rid of the switching valve and i dont want to fill up through the bed floor with the rear mounted tanks. |
Re: 73-87 Rear Mounted Aluminum Tank
Quote:
|
Re: 73-87 Rear Mounted Aluminum Tank
X2 on the price. I'll be in the market for one of these soon.
Posted via Mobile Device |
Re: 73-87 Rear Mounted Aluminum Tank
Pricing for the above tank will be around $349 or so. I am looking into the bigger saddle type tank as well.
|
Re: 73-87 Rear Mounted Aluminum Tank
how many gallons is that tank?
|
Re: 73-87 Rear Mounted Aluminum Tank
Quote:
|
Re: 73-87 Rear Mounted Aluminum Tank
I looking for fuel cell. Is there a way to get it baffled.
|
Re: 73-87 Rear Mounted Aluminum Tank
I want one of these tanks. but i need it to not hang down so low. Im bagging my truck. do you think this tank will hit the ground? if you shallowed one, what would be the cost? Thanks!
|
Re: 73-87 Rear Mounted Aluminum Tank
from David's diagram, it looks like it will hang down approximately 6.5" from the bottom of the frame rail.
|
Re: 73-87 Rear Mounted Aluminum Tank
yea i think that would be too low.
|
Re: 73-87 Rear Mounted Aluminum Tank
You still there Dave? How many gallons is the one pictured. Will it work with the Porterbuilt rear setup?
|
Re: 73-87 Rear Mounted Aluminum Tank
I have one of those tanks in Project C-10 and it is awesome, it does hang below the frame but not that much. If I can remember I will take a picture from the back of my truck so you can see.
Awesome build quality Dave !! |
Quote:
Posted via Mobile Device |
Re: 73-87 Rear Mounted Aluminum Tank
Would it be possible to build a shallower saddle tank for a bagged truck. The guy I bought my truck from had a factory one sectioned to fit so the truck could lay frame and I would like to keep it there so I can keep my air tank and compressors at the back of the truck under the bed
|
All times are GMT -4. The time now is 03:43 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com