Wanted: Blazer Bedside Patch!!
 

I am looking for a patch of the lower rear bedside on for my blazer. I need the patch from just above the body crease at the top of the chrome belt line all the way down and from the wheel well all the way to the end of the bed panel. I could use this patch panel for either side but I need it the most for the passenger side. I could also use a patch from a short wheel base truck bed.

Please let me know what you have. Below is a picture of the area I am needing a patch for. Thanks!
http://i848.photobucket.com/albums/a...r/DSC00095.jpg

Re: Wanted: Blazer Bedside Patch!!
 

I'll check my stash in the next day are two. I think I have some sides left from my Blazer days.

Re: Wanted: Blazer Bedside Patch!!
 

Thanks! Just let me know if you find anything.

Re: Wanted: Blazer Bedside Patch!!
 

Still looling! It doesnt have to be perfect or from a blazer for that matter it just has to be useable. Just let me know what you may have.

Re: Wanted: Blazer Bedside Patch!!
 

Just out of curiosity, can't you weld up the holes or mock up a smaller patch? It doesn't look that bad in the pic.

Re: Wanted: Blazer Bedside Patch!!
 

It didnt look too bad until I sanded the paint off. Then instead of 4 holes there were about 20 holes, and the whole backside is extremely pitted. Anyways it doesnt look like I need the patches anymore. I was able to use patches from junked front fenders.

No longer looking for these patch panels!!!