Speedo leak
 

Re: Speedo leak
 

Try pulling the Driven Gear Speedometer Sleeve. There should be an O-ring on the bottom between it and the transfer case. I am in the middle of tracking one down right now for mine. Goes where the arrow points.

Re: Speedo leak
 

Motor City K5 has what you guys need - It's the inner seal. Easy to press out the old one and press in the new.

Re: Speedo leak
 

Thank you guys, I would like to install it at home. Is there an installation video?

Re: Speedo leak
 

See if the photos here suffice, worked well enough for me: https://www.motorcityk5.com/i-13102-...=category:9415

Re: Speedo leak
 

I think that this is the most appropriate solution in my opinion instead of the complete jaw, but what is the O-ring measurement?

Re: Speedo leak
 

I bought it but I'm afraid I didn't find the right screwdriver to open it because the space is too tight for the key .

Re: Speedo leak
 

Mine went in fine and immediately fixed the leak.

Just remembered this: Torqueking.com sells a new speedometer drive adapter nut that has a new sleeve installed. They are a good source for NP205 parts.

Re: Speedo leak
 

I am still at this stage haha I searched for special socket It’s a thin socket and did not find it to unlock this part.

Re: Speedo leak
 

Use a 12 point socket it will fit

Re: Speedo leak
 

Thank you sir, the job has been completed successfully

Re: Speedo leak
 

You bet - happy to hear that's fixed and thanks for the update.

Re: Speedo leak
 

I am very happy to learn from you. I was able to make a special Socket .

Re: Speedo leak
 

You WIN! That's awesome.

Re: Speedo leak
 

Wow, that's very cool you can make your own tools. Nicely done!

Re: Speedo leak
 

Thank you all . I also suspect this speedometer ratio adapter leaking as well . Would I like to exchange it for a new one . Where can I get a new one?

Re: Speedo leak
 

4 screws and it opens. You can clean and replace the grease inside. The gaskets is most likely trash. I resealed mine using a very thing line of silicone.

Re: Speedo leak
 

I'd try this first and if unsuccessful or you need a different ratio to make the speedometer read correctly contact these folks: https://speedometercablesusa.com/gear_box_adapters.html

They assembled the one in use on my Blazer and with US parts. I'm extremely pleased with their work. Heck, get a new speedometer cable too :)

Re: Speedo leak
 

I don't know how to thank you guys. I'm still learning a lot from you

Re: Speedo leak
 

Here's a thread I made on the ratio adapter they made: https://67-72chevytrucks.com/vboard/...d.php?t=804681

Re: Speedo leak
 

If he leaks again, I will burn the truck hahaha

Re: Speedo leak
 

I appreciate that sir , Thank you

Re: Speedo leak
 

We have an old Arabic proverb that says (the last remedy for the ironing problem) I will replace everything new. Thank you all

Re: Speedo leak
 

It has been installed and I hope it will not leak again.

Re: Speedo leak
 

Nice. Let us know how it works. Inshallah, no leak