disc conversion
Hvae been looking at disc conversion for 1969 Panel truck. Noticing most say they are same thru 1987. I take that to mean .If I find a set off of any of those years it will bolt on. Correct or am I missing something?
|
Re: disc conversion
I've read that at least half ton front crossmembers can be swapped from 71 to some year as a way to get front disks. Don't forget the master cylinder and prop valve.
|
Re: disc conversion
The spindles have different tapers for the ball joints and tie rod ends. 63-70, 71-72, and 73-87 is the differences. Ball joints for all three tapers fit in stock 63-72 and 73-87 arms. Difference in arms is at the control arm bushings. Steel for 63-72, rubber for 73-87.
I’m using 73-87 ball joints in stock 63 control arms on my 63’s disc conversion |
All times are GMT -4. The time now is 09:01 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com