The wishbone if using our stock trailing arms needs to have some custom parts built for it. I have had them built for my shop truck and my truck. You have a few options. The most expensive part is getting some of the parts machined. Y
You mount the one end on the rearend. You need to make a bracket to mount it there unless you have a 9inch. It goes directly in the center of your rearend. Then the two other mounts are going to be place relitivly close to your front trailing arm mounts....we mounted our to the crossmember/and frame. The machine part is we had to make a slide peice that goes in the one end on the rearend. Since these 2 links arc it needs to slide so there is no bind. This part need to be heat treated and the bushing you use on the heim joint is a bronze peice that oils itself.
I will try and take pics of what we have to do this and shed some insight.
|