The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Not another build thread! Progress on my '67

67ChevyRedneck · 10-22-2006, 10:01 PM

WOHOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO ALMOST DONE!

I started off friday night swapping out the rotors, (from 5 lug to 6 to match the rear of the truck) 3 seperate trips to the parts store and I was done

It got cold FAST too. I painted the inner fender with a brush and some rustoleium semi gloss black. Looked much better than the black and blue over spray I had under there before.

Edit: Believe it or not, there is some somewhat nice looking black paint under all of that mud, dust, and overspray (the suspension was FULLY rebuilt 2 years ago with all MOOG parts.) The shocks are new too, just need a new set for the rear now.

10-22-2006, 10:01 PM	#184
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Not another build thread! Progress on my '67 WOHOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO ALMOST DONE! I started off friday night swapping out the rotors, (from 5 lug to 6 to match the rear of the truck) 3 seperate trips to the parts store and I was done It got cold FAST too. I painted the inner fender with a brush and some rustoleium semi gloss black. Looked much better than the black and blue over spray I had under there before. Edit: Believe it or not, there is some somewhat nice looking black paint under all of that mud, dust, and overspray (the suspension was FULLY rebuilt 2 years ago with all MOOG parts.) The shocks are new too, just need a new set for the rear now. Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 10-23-2006 at 02:46 PM.