The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

skidder111 · 10-09-2008, 01:14 PM

Critter

I had the same issue with a 4" Rancho with new springs on my 72 K5. I took the cable brackets right off the frame and bolted them back onto the bottom flange of the frame. This was a few years ago, so I don't remember if I swapped the brackets from side to side, or if I used the original holes. It was free and did make the cables sit more comfortably. Hope this helps.

10-09-2008, 01:14 PM	#4
skidder111 Registered User Join Date: Jan 2008 Location: Pincher Creek, Alberta, Canada Posts: 140	Re: Emergency Brake for Lifted Blazer??? Critter I had the same issue with a 4" Rancho with new springs on my 72 K5. I took the cable brackets right off the frame and bolted them back onto the bottom flange of the frame. This was a few years ago, so I don't remember if I swapped the brackets from side to side, or if I used the original holes. It was free and did make the cables sit more comfortably. Hope this helps. Last edited by skidder111; 10-09-2008 at 05:36 PM.