Thank you Jamie and RF...
Is this correct:
02 sensor:
One black wire from 02 sensor to ground
One black wire to pin # 87 on relay (purp/blk 10 or 12 AWG)
Relay:
Relay is just like the one in post #219
Pin #86 to ground (blk/yellow 16 or 19 AWG)
Pin #30 to battery w/ 10amp fuse (red 10 or 12 AWG)
Pin #87 to 02 sensor (purp/blk 10 or 12 AWG)
Pin #85 To ingtion hot (brown 16 or 18 AWG)
Also, I do have an aftermarket VSS. The instructions said to ground the vss to the computer. Do I need to do this or ground it to the tranny/t-case/frame?
"A-6 is switched 12volts from Ignition relay" so A6 should only be hot when ingition is on?
Is the stock power wire for the hei dizzy brown with a single white clip on it?
Thanks again for all the help and answering my amature questions
If I am lucky, it will be running next weekend.