Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
here's what I'm laying out for a steel bed, with EFI.
I sent this to Dave to review...anybody else see something here let me know.....I basically took msgross' drawing and tweaked it a bit.
My measurements would put this about 1/4" clearance to the bottom of the bed cross sills. So you could move the side flanges down to 4" if you wanted it TIGHT against the bed. I left some room to run wires if needed.
capacity calculates to 19.6 gallons BTW.
Thanks,
Andy
__________________
71 C10 long bed, 2003 6.0L, 06GTO E40, T56, 12bolt 4.10 rear
|