The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1972 Blazer

hgs_notes · 11-02-2009, 11:01 AM

If there is not a lot of misalignment on the bolt hole, you might be able to just run a drill bit through it to clean up the hole edges and drop the bolt through. I had to do this on my cab after replacing the floor pans. I have an extra windshield frame you can PM me if interested.

11-02-2009, 11:01 AM	#66
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,116	Re: 1972 Blazer - 'Bullet' Project If there is not a lot of misalignment on the bolt hole, you might be able to just run a drill bit through it to clean up the hole edges and drop the bolt through. I had to do this on my cab after replacing the floor pans. I have an extra windshield frame you can PM me if interested. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff