The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 67 Disc Conversion (I have a complete 84 Rolling Chassis)

PanelDeland · 12-09-2009, 06:13 PM

The whole crossmember swaps over.Make sure to get the booster and MC and proportioning/residual valve from the donor.There is a hole or two per side that needs either reaming or drilled.There should be a write up in the FAQ's section (trucks).Should also be a write up on pic posting,and most other posting questions in the FAQ's (site related)Make sure to read and use the one on pics(we's pic hoe's here).

12-09-2009, 06:13 PM	#3
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: 67 Disc Conversion (I have a complete 84 Rolling Chassis) The whole crossmember swaps over.Make sure to get the booster and MC and proportioning/residual valve from the donor.There is a hole or two per side that needs either reaming or drilled.There should be a write up in the FAQ's section (trucks).Should also be a write up on pic posting,and most other posting questions in the FAQ's (site related)Make sure to read and use the one on pics(we's pic hoe's here). __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"