Re: Project Old Blue, 1965 C10, Rebuild Version 2010
Numbers for the truck arm mounts were 39.5" (F) & 41.5" (R). The tape measure was ever so slightly bowed: I measured the rear from the C/L of the brackets across the differential cover; I measured the fronts from the C/L of the brackets under the pinion snout.
If you need more specifics, give me a shout.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|