The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - My Build Thread to Document and watch progress 72 C20

dukkie · 03-21-2010, 02:33 AM

3-20-2010 Motor/Trans Purchased 500 Dollars

A Chevy 355 (3970010 block with a .030 overbore using a stock 350 crank). It has an Edelbrock Performer intake, a brand new starter, a newly rebuilt distributor, and a new water pump. It also has an xtreme energy cam, a set of 882 heads, and some Hypereutectic pistons.
It's a stock th400 for it has about 20k miles on it, comes with the torque converter, the electric kick down components, and the front section of a driveshaft with the proper yoke.

03-21-2010, 02:33 AM	#6
dukkie My Spoon Is Too Big Join Date: Mar 2010 Location: Magnolia Tx Posts: 457	Re: My Build Thread to Document and watch progress 72 C20 3-20-2010 Motor/Trans Purchased 500 Dollars A Chevy 355 (3970010 block with a .030 overbore using a stock 350 crank). It has an Edelbrock Performer intake, a brand new starter, a newly rebuilt distributor, and a new water pump. It also has an xtreme energy cam, a set of 882 heads, and some Hypereutectic pistons. It's a stock th400 for it has about 20k miles on it, comes with the torque converter, the electric kick down components, and the front section of a driveshaft with the proper yoke. __________________ 1972 C20, 03-14-10 Build Thread 2000 Silverado 4.8L, 11-04-13 (Currently Parting) 1999 Silverado 5.3L, 07-07-14. (Engine Donor) 2015 Ram 05-20-15 (Daily Driver)