Re: Holley Carb kicking my tailpipe!
Checked float level... a small trickle from primary (matches Holley's recommendation)
Linkage has some play on accel. pump (a bit tight) - small adjustments being made to loosen it up
Pump shooter is a #25 on the primary (68step... why a 31?) [edit - there are no tubes coming out of the shooter]
Going to try the idle -> WOT (engine off) watching squirters... [edit - both small nozzles in squirter are spraying through linkage sweep]
As a side note - checked vacuum, no apparent leaks...
__________________
--> Insert Witty Comment Here <--
Last edited by Jermz01; 06-25-2010 at 08:21 PM.
Reason: update idle -> WOT transfer, shooter update
|