[OrrieG]

Odds and ends day. Checked out the trans temp gauge, its ok, painted the bezel to match the dash. Routed the temp line. Got stuff for the center A/C grille. Slight modification to the brake pedal hole it move a little and was rubbing on the pedal shaft. Installed the VA defrost vents. If you are using VA install the hoses on the vents before installing them, the manual says to do it later, looks to me like it would be a challenge, I had to work pretty hard getting the hoses on working on the bench. Modified the stock heater control with the VA supplied switch, etc. Need to go round up some nylon cable end spacers I forgot to ask for and don't want to pay the minimum $15 shipping and handling fee to get them here. AT least its warmed up, stove got the shop to a toasty 60 degrees.