The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Captainfab** · 06-26-2011, 01:41 AM

I would recommend a set of rebuilt Vortec heads with a Performer RPM Vortec intake topped with a 600-670 cfm carb (I prefer Holley carbs). For a Cam I would go with something like a Comp XE268, or Lunati 60103. Then you will want a set of headers with 2-1/2" exhaust with good flowing mufflers of your choice.

If you don't get much response here, you might see if a mod will move this to the 'Engine and Drivetrain' section for you.

06-26-2011, 01:41 AM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: building 350sb I would recommend a set of rebuilt Vortec heads with a Performer RPM Vortec intake topped with a 600-670 cfm carb (I prefer Holley carbs). For a Cam I would go with something like a Comp XE268, or Lunati 60103. Then you will want a set of headers with 2-1/2" exhaust with good flowing mufflers of your choice. If you don't get much response here, you might see if a mod will move this to the 'Engine and Drivetrain' section for you. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE Last edited by Captainfab; 06-26-2011 at 01:43 AM.