Re: D60 Front Brake Upgrade
Quote:
Originally Posted by mcmlxix
The stock knurl diameter is listed as .65 and I measured all of my studs that came out of the hub with a range of .642 to .648
The 14mm was a thought because my rear (the one I might sell, long story) has the 14mm - 1.5 but none of the dimensions work...
They make a longer stud in 9/16 but its only 3-9/32" and I wanted at least 3-3/4" ... also, the knurl is .677 so I would have to drill... (610-303 dorman)
I did find that Gorilla makes a lug nut for the 5/8 with the correct 60 degree seat so I think I'm going to upgrade to a 5/8 stud.. its knurl is .657 so I probably wont need to drill.... (610-418 dorman)
|
You will probably need a press to get them in with the .657" knurl but it should work.
__________________
miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577
69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been
69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc
68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E
79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars
|