Quote:
Originally Posted by hgs_notes
I got my e-brake cables from rockauto.com.
Been reading theis build overthe past few days and just got caught up. Well done. You made the LS swap look easy. One mistake I made when I did my door bottoms was that I did not measure top to bottom first and I ended up having them tight for clearance to to bottom in the cab opening. The rocker postion should be checked for up and down position compared to the door also. I'm just getting started with the rockers on my Jimmy.
|
Thanks, I will try rockauto.. Yes I measured the opening before I removed the old rockers, and I will install the doors before I weld the rockers in. Thanks for the tips.. good luck with your build...