Re: 72 C20 "Old Mustard"
Parts store didn't have the tie rod end for the Man Van, so I ended up with some time for Mustard this afternoon. Pretty much have it ready to be braced up and picked off the frame at this point. Pulled the steering column, speedo cable, tach wiring and tach, floor shifter handle, clutch linkage (not going back in), water temp thermocouple wire/gauge, crappy, brittle plastic tubing for oil pressure gauge (probably only had a few miles left on it the way it desintegrated when I touched it). Now I gotta come up with a spreader for the cherry picker, brace the door openings and brace across the cab, and disconnect what's left of the mounts (might be blue wrench time).
__________________
Nick
Old Mustard, 1972 Chevy C20, 350, TH350, 4.10 Dana 60 rear, owned since I was 16 in 1986
http://67-72chevytrucks.com/vboard/s...d.php?t=545356
Blue Bell, 1987 K20, 6.2L Diesel, TH400/NP208, 4.10 gears
Ustahav 1976 K10, 350/350/203, Gov Loc, Yooper beater trail truck.
|