Quote:
Originally Posted by oem4me
I couldn't tell you if there is room enough to mark the hole locations from the inside without looking, but it would be simple enough to make a paper template from the drivers side exterior, and then use it inside-out to mark the passenger side. That should get you pretty close.
|
Finally getting around to doing this... My driver's side door mirror mounting holes have been bondo'd over and still trying to see if I can get in from the inside to drill out the bondo in the nut and thru the bondo on the door >> "carefully" without making a big mess to repair/paint. Maybe a Dremel with a flexible extension piece might fit in there. If I knew exactly where to drill from the outside, I would, but can't tell where the holes are.
Roy