The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Wrenchbender Ret** · 12-18-2013, 12:52 PM

Screw the large hex ends out of the arm. When going back measure the distance from the hole to the arm on each side & turn the shaft to get it as close to even as possible.

12-18-2013, 12:52 PM	#2
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,193	Re: Control Arm Disassembly Screw the large hex ends out of the arm. When going back measure the distance from the hole to the arm on each side & turn the shaft to get it as close to even as possible.