Re: 700R4 build thread.
Accumulator Valve continued.
Assemble Valvetrain as shown below, The spring likes to hang-up in the bore, Turn the Valve Body with the Bore facing down during install.
The TransGo SK 700 (Senior) comes with a wire retainer that goes behind the 1/8" plug/4-3 pressure switch directly above the Accm. bushing, This allows Spring/Valve/Bushing changes without dropping the Valve Body.
The SK 700-JR doesn't always come with the retainer, Make your own if needed.
Not All Valve Bodies are tapped for the 3-4 Pressure Switch. If so Install original Roll Pin.
|