[MP&C]

Today Kyle worked on prepping the driver's door for epoxy primer...





Meanwhile, with the passenger door unchopped, I turned my attention to the slots for mounting the stainless trim and drain holes.. The old door's "window sill" was aligned and clamped in place to mark the slots..








Then the slots are marked onto the new skin, and that location transposed down to the proper location..











This is what happens when you pull the carbide cutter out too far while joining the holes...





Weatherstrip holes drilled, drain holes laid out...











Kyle has the driver's door scuffed and ready to go, once the passenger door is finished we can spray some more epoxy..