Another productive day yesterday, didn't get around the brake problem, but I had solved the problem I had with my turn signals.
the PO put in LED taillights and the left one had worked, but didn't since I put in the Easy wiring set.
The turn signals also didn't work yet and when I pressed the brake, the brake light would turn off on the side which I selected with the turn signal.
So starting at the back, I discovered that the left taillight connector had come loose some how, that was easy to fix. next I checked my ground cables, which looked alright, but I cleaned the metal underneeth just to make sure it was metal on metal and not metal on rust
I then moved towards the front and re-read though my wiring set-up..
Shock and awe when I found out I connected up the wires in such a way the ground was completely missing
After fixing the left side, both front and back where working. tomorrow I'll get to the right side and hopefully the brake issue