Quote:
Originally Posted by 68Timber
Lets hope someone starts reproducing the seat buns. Between high back, low back, and bench, you'd have a huge market.
|
Quote:
Originally Posted by Chaplain
I know... Fortunately, our donor truck had a good late model seat. The original 79 seat I removed was "ok" from the steering wheel over to the passenger side but it was just "raggedy" from the driver side left leg and off the edge.
|
Actually. they do make them. Last time I looked you were at 350.00 for a bench, and close to 500.00 for buckets. Not really good bang for the buck in my opinion.
I have found that about 7/8" of the seat foam is usually in good condition. By replace the lower layer on the edge, and the top layer all across it works out to be fairly comfortable.