Quote:
Originally Posted by NoStopN
I think there is a slight difference in the hub size between the older trucks & newer. Since the H2 & your 2001 HD probably have the same axle, it would stand to reason that they would fit.
|
To the best of my knowledge, the Dana 60 full floater hubs stick out further than the GM corporate 14 bolt full floater.
If you have the Dana 60, I would highly recommend measuring before you buy wheels just to discover the caps don't clear.
If you look at the pictures, I have both sets of these hub caps. I learned the hard way that the newer gold and black caps don't clear my Dana 60. I believe they started putting the GM corporate 14 bolt on trucks in the gold and black hub cap era.
So I had to spend considerably more for the period correct caps with the blue bow tie - I like them but they are harder to find and usually cost much more unless you get lucky and find a good bargain.
In my experience, the Dana 60 full floater is a challenge when it comes to fitting caps, whether they're factory hub caps or center caps that come with aftermarket wheels.