Quote:
Originally Posted by Signkutter
If I have a Dana 60 8 lug rear on a 2 wheel drive C20.... is it safe to use 1.5 inch thick wheel spacers ( the kind that bolt to the hub and have their own lugs/studs)? i have 14.5 mil on the front and 1/2 lugs on the rear and would like to match them up plus be able to mount hub caps or center caps
|
I'm not sure of the safety aspect, but there's no way you should need 1.5 inch spacers to gain adequate clearance to use the late model factory caps. Of course the thickness needed will be somewhat variable depending on the thickness of the wheel mounting flange (not sure that's the correct term).
Perhaps davepl can provide further info on what he used with his H2 wheels.