The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1963 GMC Step-Van 7

Aberdare · 08-14-2018, 07:12 PM

Tuesday Continued...

Remember the nice forward floor sub-frame assembly I constructed back in April? Well now is the time it comes into play as a structural component. With the assistance of the lads in the workshop, we hoisted the forward cab section back onto the chassis. I welded on the door opening rear uprights, joining the upper header to the forward floor sub-frame. I also test fitted what used to be the inner door pocket panels to what will become the partition wall between the cab area and the cargo area.

Check it out...

08-14-2018, 07:12 PM	#69
Aberdare Registered User Join Date: Oct 2017 Location: Manitoba, Canada Posts: 141	Re: 1963 GMC Step-Van 7 Tuesday Continued... Remember the nice forward floor sub-frame assembly I constructed back in April? Well now is the time it comes into play as a structural component. With the assistance of the lads in the workshop, we hoisted the forward cab section back onto the chassis. I welded on the door opening rear uprights, joining the upper header to the forward floor sub-frame. I also test fitted what used to be the inner door pocket panels to what will become the partition wall between the cab area and the cargo area. Check it out... Attached Images __________________ RED SEAL CERTIFIED JOURNEYMAN SINCE 1993 My 1966 GMC Value Van Project 1951 GMC 9430 1-Ton I'm just going to put an OUT-OF-ORDER sign on my forehead... and call it a day.