The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Rdwagoner · 11-11-2018, 02:06 PM

UPDATE***
The truck runs and sounds like a beast! I did have it wired wrong and I spliced into the pink ignition wire for the constant 12v, ran to my relay for the MSD box and she fired right up! Now I have the computer hooked to it and it gave me a cam sensor fault. One other thing is it’s idling about 1100rpm and I have the idle screw all the way out. It’s a summit 600 carb. I can press the throttle forward barley, just enough to get the idle down to about 850rpm or so. Any ideas on the idle? Thank you everyone for your help! I’m just glad to see and hear it run!

11-11-2018, 02:06 PM	#16
Rdwagoner Registered User Join Date: Nov 2018 Location: Loganville Posts: 52	Re: Carbed 5.3 won’t start please help! UPDATE*** The truck runs and sounds like a beast! I did have it wired wrong and I spliced into the pink ignition wire for the constant 12v, ran to my relay for the MSD box and she fired right up! Now I have the computer hooked to it and it gave me a cam sensor fault. One other thing is it’s idling about 1100rpm and I have the idle screw all the way out. It’s a summit 600 carb. I can press the throttle forward barley, just enough to get the idle down to about 850rpm or so. Any ideas on the idle? Thank you everyone for your help! I’m just glad to see and hear it run!