The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**'68OrangeSunshine** · 12-09-2018, 04:43 PM

I found the connectors for the '67 Parking Lights were slightly different from the MY '68 Running Light connectors. This is the connection that has a junction thru the radiator bulkhead. On the '67, the spade terminals inside the plug have one vertical and one diagonal [ -- /]. On the MY '68 it's one vertical and one horizontal [ -- l ].
When a deer took out the grille on my '67 K/10 Suburban, and I got a grille off a '68 Sub, I found this out. I swapped in the '67 Parking Light fixtures onto the '68 grille. The fixtures were identical otherwise.

12-09-2018, 04:43 PM	#9
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,136	Re: 67 wiring harness question I found the connectors for the '67 Parking Lights were slightly different from the MY '68 Running Light connectors. This is the connection that has a junction thru the radiator bulkhead. On the '67, the spade terminals inside the plug have one vertical and one diagonal [ -- /]. On the MY '68 it's one vertical and one horizontal [ -- l ]. When a deer took out the grille on my '67 K/10 Suburban, and I got a grille off a '68 Sub, I found this out. I swapped in the '67 Parking Light fixtures onto the '68 grille. The fixtures were identical otherwise. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.