Quote:
Originally Posted by DransportGarage
VERY cool!
|
Thanks Bob!
Quote:
Originally Posted by MARTINSR
That is pretty damn cool, so how did you do it?
Brian
|
It's a plotter that cuts a vinyl sheet with adhesive on the back side. I clean up the image and then let the cutter cu out the outline then use a very sharp knife to remove the vinyl I don't want then apply a very low tack masking tape then put it on where I want it and use a squeegee to set the adhesive and pull of the low tac tape! I learned how to do this many years ago making signs at Snoqualmie Pass ski area! here are some other things I've done. this is the same stuff you use for the CHEVROLET lettering on the tailgate.