Quote:
Originally Posted by 19SIKtySix
I recently purchased the Russell adapters from transmission fitting to -6an and also purchased adapters to -6an from my radiator.
I already have the twist-lok lines and fittings for my fuel system, I just wasn't sure if it was able to be used for transmission cooling as well.
When assembling my fuel system, I had no problem putting the line on the fittings, they are double barbed and you have to push like crazy to install. I have no worries about these coming lose, plus it was real quick to put together.
|
Ah, looks like that line is rated to 250psi and is oil safe, which should be plenty for trans cooler lines, and I am sure the ends would be fine too - the cooler lines on my Toyota (with similar pressures as a GM OD Trans) uses fuel injection rated clamps at the cooler end and oil-safe fuel injection hose... been great for 2+ years and 50,000 miles.