[traut811]

I got the outside lip removed. I won't sand/Polish until I'm finished with everything else as they'll get scuffed before then anyway. With the first picture, my door will work if I can get the lenses this flush. The only way I can see doing this easily on the other 3 lenses is knocking down the tab on the back side of the lens. If I took the whole tab on each side I'd be dead on flush. Any reason this needs to be there? I may have to do something different than a foam seal so the lens mount screws still seat correctly I suppose.

Second picture is the passenger side with outside lip removed
Third picture is the tab on the back I want to get rid of.