The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Stephen717** · 12-10-2019, 02:12 AM

Hi all, long time no post. I got the radiator supports welded on and welded the motor mount where there was an unnecessary hole in it. Then I got busy with life. Was saving for rear brakes and was working up on a ladder when the ladder kicked out and I rode it to the ground. So I've been ooc since Halloween with a broken ankle, medical bills, and trips to Morgantown WV which is a 3 hour drive for me. The frame has been sitting with no rear brakes and thus no rear tires, the motor is still sitting on the old frame, and someone stopped to look at the truck thinking that my cab was in better shape. It was not. Work is starting to ramp back up so hopefully I'll be able to pay these medical bills off after the holidays and can get back to work on the truck.

12-10-2019, 02:12 AM	#43
Stephen717 Senior Member Join Date: Aug 2016 Location: Loris South Carolina Posts: 428	Re: Truck update Hi all, long time no post. I got the radiator supports welded on and welded the motor mount where there was an unnecessary hole in it. Then I got busy with life. Was saving for rear brakes and was working up on a ladder when the ladder kicked out and I rode it to the ground. So I've been ooc since Halloween with a broken ankle, medical bills, and trips to Morgantown WV which is a 3 hour drive for me. The frame has been sitting with no rear brakes and thus no rear tires, the motor is still sitting on the old frame, and someone stopped to look at the truck thinking that my cab was in better shape. It was not. Work is starting to ramp back up so hopefully I'll be able to pay these medical bills off after the holidays and can get back to work on the truck.