Re: Yet another GMC build
Got a Ridetech musclebar for c4 corvette. 1.25” when stock was under an inch. The original end links hit coil overs and I found my heim joints on the front of the a arm were touching the tie rods at full steering lock. Ridetech has a special bracket that places the links in the middle and clears all of it. To get the bar high enough to fit correctly I had to notch the frame and make 1/4” plates for the bushings, but yep, the bar is actually inside the frame instead of on the bottom of it. Don’t see why it shouldn’t work, though.
|