The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**cwcarpenter98** · 07-11-2021, 08:34 PM

The main need is the passenger corner, but I could also use some extra from the passenger side to help repair a couple spots on the driver's side. The driver's side corner looks ok to me.

I'm thinking it only needs to go about 6 to 8 inches above the door frame line. I think I might also need a little bit from the passenger corner on the inner back window panel (right under the coat hook)

Thanks!

07-11-2021, 08:34 PM	#7
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,431	Re: 66 C10 Longbed Parting Out The main need is the passenger corner, but I could also use some extra from the passenger side to help repair a couple spots on the driver's side. The driver's side corner looks ok to me. I'm thinking it only needs to go about 6 to 8 inches above the door frame line. I think I might also need a little bit from the passenger corner on the inner back window panel (right under the coat hook) Thanks! Attached Images __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson