So the postie delivered nothing today.
But the DPD courier made my day.
And laid out.
I do hope that I will be able to figure out what goes where.
After work I went down to the garage, decided that the gusseting was probably the more important job to get started on.
Pulled the chassis out after pushing the wheels and suspension bits out the way.
Using CAD the job was not that awkward at all.
After some cutting, shaping, grinding, I was happy.
I had also tested out my stick welder, which is part of the MIG welder that has stopped working.
The 3mm plate I have used for the gussets are probably thicker than the tubing of the frame, so the stick welder should be perfect to create deep, heavy welds.
In the morning I will use a flap wheel to grind back the primer and any residual rust etc in the spots `I need to weld.
All my gussets are ready and waiting on the chassis for the welder.
Hope it all welds and works easily.
.