|
Re: New Brakes, It would be nice if they worked, 67 GMC
Glad it worked out for you. I have found aftermarket kits to be hit or miss. Boosters can be too small, M/C bore the wrong size, and a generic one-size-fits-all proportioning valve that assumes your truck has the same weight distribution as a Nova.
My 69 C10 has a factory stock M/C, booster, and prop valve from a 71-72 truck, along with spindles, disc brakes, and steering linkage from a mid-80s truck. (Center link and tie rod ends are larger diameter than stock 67-69 C10.) It has been working very well since 1995. In fact it almost works too well, and I may some day drill a lower hole on the pedal to make it a little less touchy.
__________________
Mike
1969 C10 LWB -- owned for 34 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes.
1982 C10 SWB -- sold
1981 C10 Silverado LWB -- sold, but wish I still had it!
1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming.
Retired as a factory automation products salesman.
Worked part-time over the years for an engine builder and a classic car repair shop.
Member here for 23 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!
|