The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Wrenchbender Ret** · 11-28-2021, 03:07 PM

I used to replace the rubber only years a go when I had a shop. Its better to replace the whole assem. as they are not all that expensive. You can spin the brg & see if it is quite. If so you can just replace the rubber.

11-28-2021, 03:07 PM	#2
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,193	Re: 1969 C 10 driveshaft carrier bearing I used to replace the rubber only years a go when I had a shop. Its better to replace the whole assem. as they are not all that expensive. You can spin the brg & see if it is quite. If so you can just replace the rubber.