Re: Power Steering Frame-Reinforcement Plate
My current SWB 72 K10 has the factory frame reinforcement. I recall my last 72, a LWB K20 having it as well. Could be mistaken, many years ago. Current truck has two holes in it for a bracket at the front crossmember. Maybe only a bracket there on the K20. The holes almost line up with the separate reinforcement included with the ORD steering brace. If there is is a difference on some K trucks it is curious ORD only offers one brace for 67-72 trucks. Their brace allows for the factory plate. On rear most steering box bolts the upper steering box bolt does not go through factory reinforcement plate but the lower does.
Last edited by Richard; 12-07-2021 at 04:51 AM.
|