The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**pjmoreland** · 12-22-2021, 05:02 PM

I used the filler flange to mark the mounting screw locations and then drilled 1/16" pilot holes. I did not drill all the way through the wood. I painted the exposed wood to protect it from moisture. I removed the filler flange after test-fitting it.

12-22-2021, 05:02 PM	#6
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,334	Re: Boyd Tank Installation I used the filler flange to mark the mounting screw locations and then drilled 1/16" pilot holes. I did not drill all the way through the wood. I painted the exposed wood to protect it from moisture. I removed the filler flange after test-fitting it. Attached Images Last edited by pjmoreland; 12-23-2021 at 02:49 AM.