Re: Boyd Tank Installation
Finishing up the fuel lines required removal of the mechanical fuel pump & push rod, and installation of a block-off plate, which I got from a 1995 Chevy truck at a wrecking yard. I mounted the fuel pressure regulator to the lower two bolts of the block-off plate, but I had to drill two new mounting holes because the existing holes in the bracket were too high and too small. As mentioned earlier, I reshaped the hard return line so it pointed at the regulator instead of at the fan shroud. I recommend installing a zip tie around the two hoses to prevent them from drooping down and contacting the steering centerlink.
Last edited by pjmoreland; 12-22-2021 at 11:02 PM.
|