The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

jimbosprint · 01-04-2022, 05:38 PM

The Hydroboost bracket from CaptainFab showed up yesterday so I worked on fitting everything to the truck today. The bracket interferes with the steering column firewall bracket a bit so both parts needed grinding. The knurl on the Hydroboost studs did not quite fit through the holes in the new bracket so I drilled those holes out to 1/2". And the studs were about a half inch too long so I cut them down.

Name: PXL_20220104_183906511.jpg
Views: 460
Size: 56.0 KB

Name: PXL_20220104_183906511.jpg
Views: 460
Size: 56.0 KB

Name: PXL_20220104_190241697.jpg
Views: 455
Size: 34.0 KB

Name: PXL_20220104_203636481.jpg
Views: 403
Size: 57.3 KB

Name: PXL_20220104_193110690.jpg
Views: 448
Size: 80.1 KB

Name: PXL_20220104_193925945.jpg
Views: 459
Size: 75.1 KB

01-04-2022, 05:38 PM	#412
jimbosprint Registered User Join Date: Jul 2014 Location: Chico, California Posts: 940	Re: '72 Cheyenne K10 The Hydroboost bracket from CaptainFab showed up yesterday so I worked on fitting everything to the truck today. The bracket interferes with the steering column firewall bracket a bit so both parts needed grinding. The knurl on the Hydroboost studs did not quite fit through the holes in the new bracket so I drilled those holes out to 1/2". And the studs were about a half inch too long so I cut them down. __________________ '72 Chevrolet C20 Deluxe \| '72 Chevrolet K10 Cheyenne www.jimbosprint.com Last edited by jimbosprint; 01-05-2022 at 05:21 PM.