I did a bit of poking around on my 1960...
Here are the parts that I used for bearings / seals ;
Timkin : R1502EL - bearing
SKF : 18695 - seal
the best prices I found was on RockAuto, searching by PN
I believe we just used " the right stuff " or your preferred gasket sealer instead of a gasket and 80w90 - I want to say just over 2 qts, but its been a little bit.
I ordered shoes (AC Delco) from Rock Auto, and I had done the cylinders and springs from Rock Auto on an earlier order.
Hope that helps!
Here is some of the other info I found while researching -
https://67-72chevytrucks.com/vboard/...1&postcount=12
__________________
1960 C-10 Apache- "Rusty the Redneck Reject"
1/2 Ton short bed step side.
350 crate motor, 3 speed manual (floor shifted) MKII - Buddy Buckets and Glass Packs
20+ year long term project in process
Lots of Rust, more memories...