Quote:
Originally Posted by ls1nova71
What transmission are you running? Usually you don't cut out the transmission wires. I'm guessing that plug in your pic is for the transfercase. Was your donor a 4x4?
|
nope, believe truck was a 2wd. it didnt have any of the 4x4 wires listed in the pcm that gets pulled and it also didnt have the plug near the C connectors that have 4x4 wires.
that plug that i posted a picture of seems to run where my big trans plug is. its a 3 wire plug, 1 pink 1 white1 black. the black got snipped at a ground junction. after going through the yellow block pins to be pulled, there were only 2 that has a white wire to be pulled.
blue 56 - fuel temperature/composition signal (L59 flex fuel)
red 45 - EVAP canister vent valve control
__________________
67 1/2 ton Suburban - Project DRGNWGN.
Build thread 
-_--_--_ _________
_--_-_ -/____|__|__\__
,.,,,.,.,,.,|_O _______ O_]