View Single Post
Old 07-18-2022, 10:21 PM   #23
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,118
Re: Swapping L86 6.2 8l90e into 72 k10

Quote:
Originally Posted by Hart_Rod View Post
Curious about this as well. TIA
There is a plug on the back of the compressor you just apply power to whenever the clutch is engaged, that will lock it in full displacement. That said, with VA, it may work, it may not. It will likely work but maybe not to it's full potential due to being too much displacement for VA. They are sized for the compressors they use and work best with the correct one. Would probably do better when hooked up to an original factory air set up since they used a bigger compressor.
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote