Quote:
Originally Posted by 72c20customcamper
Nope . He has them on right this is the way They show it in the instructions and exactly the same way mine are .
Mine came from Quick Performance with my 9 inch .
Like I said I had to remove the front caliper bolt point the bleeder up and it bled fine .
|
That is exactly how i have them installed, per the manf. Instructions. However i just swapped the brake bracket from on top of the axle to below the axle and now i am able to bleed the brakes. Now i just have to figure out the pedal positioning and why i have to push it almost to the floor for the brakes to engage. Again, rotate each picture clockwise 90 degrees. I dont know why the post keeps rotating my pictures.